4.1.2 Water level detector, Safety switch Feed valve replacement.
Remove 2 screws mounting the panel A./*Do not lost the feed valve packing when removing the panel A.
Panel A has been installed with screws and pawls. After remove 2 screws, insert screw driver and pull the panel A to up-ward to remove.
•Water level detector replacement
3.Remove 2 pawls mounting the water level detector.
4.Remove lead wire connector.
5.Remove the air hose.
•Safety seitch replacement
3.Remove 2 screws mounting the safety switch.
4.Remove lead wire connector.
•Feed valve replacement
3.Remove 2 screws mounting the feed valve.
4.Remove lead wire connector.
5.Remove feed hose properly.